Paradyne 7976 - Manual (Page 6)

6 7976-A2-GZ40-00 March 1999
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current, customer,
or default configuration is loaded. To access the Configuration Edit/Display
screen, follow this menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
– or –
Main Menu
→
Configuration
→
Default Factory Configuration
О ОО
main/config/edit Hotwire
Model: 7976
CONFIGURATION EDIT/DISPLAY
Network
G.703
System Options
Communication Port
Management and Communication
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Select . . . To Access the . . . To Configure the . . .
Network Network Interface Options, Table 1 DSL network interface on
the unit.
G.703 G.703 Interface Options, Table 2 G.703 interface.
System Options System Options, Table 3 General system options of
the unit.
Communication
Port Communication Port Options, Table 4 Unit’s COM port options.
Management
and
Communication H Telnet Session Options, Table 5
H Communication Protocol Options,
Table 6
H General SNMP Management
Options, Table 7
H SNMP NMS Security Options,
Table 8
H SNMP Traps Options, Table 9
Management support of the
unit through SNMP and
Telnet.