Paradyne 7976 - Manual (Page 4)

4 7976-A2-GZ40-00 March 1999
Entering Identity Information
After accessing your unit for the first time, use the Change Identity screen to
determine SNMP administrative system information that will be displayed on the
Identity screen of the Status branch. To access the Identity screen, follow this
menu selection sequence:
Main Menu
→
Control
→
Change Identity
Network Configuration
The following illustration shows several configurations including a network
application using a 4-port Hotwire 8776 M/SDSL Termination Unit in a central
office (CO). In this configuration, a frame relay switch and a router are
connected, through the termination unit, to partner units supporting a host or
router, and frame relay encapsulated or unframed data.
This figure also shows a standalone-to-standalone configuration using either
another Hotwire 7976 M/SDSL standalone unit with a G.703 interface or a
Hotwire 7975 M/SDSL standalone unit with an EIA-530A interface.
Frame
Relay
Switch
Router
E1 Host
(Frame Relay
Encapsulated
Data)
98-16093
Router
(Frame Relay
Encapsulated
Data)
G.703
G.703
Router
2.048 Mb
over
SDSL
G.703
G.703
G.703
8776 Termination Unit
in 8600 DSLAM
CO Site
7976
7976
7976
Customer
Premises (CP)
7976 7976
CP
NTU
CO Site
LTU
G.703 G.703
G.703
7976 7975
CP
NTU
CO Site
LTU
G.703 EIA 530A