Panasonic KX-FC225NZ User Manual
Page 53

9. Programmable Features
53
Using the base unit PIN/repeater
1. {j/OK}
2. Press {^} or {V} to select “
Base Unit Setup”. i {>}
3. Press {^} or {V} to select the desired item in the base unit settings menu. i {>}
4. Press {^} or {V} to select the desired item in the sub-menu. i {>}
5. Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the rightmost column of the
chart.
L
To exit the operation, press {ih}.
*1 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.
*2 If you forget your PIN, consult your nearest Panasonic service centre.
Base unit settings menu
Sub-menu
Feature (default setting)
“
Call Options”
“
Call Restrict”
“
Area Code”
“
Other Options”
“
Base Unit PIN”
Change base unit PIN (“
0000”).
–
Enter the current 4-digit base unit PIN.
i Enter the new 4-digit base unit PIN.
i {j/OK}
“
Repeater Mode”
(“
Off”): page 55
FC225-226AL-PFQX2518ZA-en.book Page 53 Friday, June 23, 2006 4:08 PM