Panasonic KX-FC225NZ User Manual
Page 50

9. Programmable Features
50
Setting the auto
disconnection
{#}{
4}{9}
To answer a call with an extension telephone in TAM/FAX mode
(page 36), activate this feature and program the code.
{
0} “
OFF”
{
1} “
ON” (default)
1. {MENU} i {#}{4}{9}
2. Press {1} to select “
ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0-9 and {*}.
L
The default code is “;
0”.
4. {SET} i {MENU}
Changing the greeting
message time for
TAM/FAX
{#}{
5}{4}
{
1} “
16s” (default): Maximum greeting message time is 16
seconds.
{
2} “
60s”: Maximum greeting message time is 60 seconds.
See page 41 for details.
Setting the scan
contrast
{#}{
5}{8}
To send or copy a document with faint or dark writing, set this
feature before transmission or copying.
{
1} “
NORMAL” (default): Used for normal writing.
{
2} “
LIGHT”: Used for dark writing.
{
3} “
DARKER”: Used for faint writing.
Copying phonebook
data from the base unit
to the cordless handset
{#}{
5}{9}
{
1} “
1 ITEM” (default)
{
2} “
ALL ITEMS”
See page 57 for details.
Screening the incoming
call
{#}{
6}{7}
To hear an incoming call from the speaker when the answering
machine is recording the message.
{
0} “
OFF”
{
1} “
ON” (default)
Note:
L
You can also program this feature with the cordless handset
(page 44).
Setting the Error
Correction Mode (ECM)
{#}{
6}{8}
This feature is available when the transmitting/receiving fax
machines are ECM compatible.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): If there is an error during fax
transmission/reception, the fax machine will support the
communication.
Note:
L
You cannot change the setting when received documents are
in memory.
Feature
Feature code
Selection
FC225-226AL-PFQX2518ZA-en.book Page 50 Friday, June 23, 2006 4:08 PM