beautypg.com

Panasonic KX-FC225NZ User Manual

Page 47

background image

9. Programmable Features

47

9.1.2 Advanced features

Changing the maximum
recording time for
incoming messages

*1

{#}{

1}{0}

{

1}

1 MINUTE”

{

2}

GREETING ONLY”: The unit plays the greeting message but

does not record any incoming messages.
{

3}

3 MINUTES” (default)

Note:

L

You can also program this feature with the cordless handset
(page 44).

Setting the remote
operation ID

*1

{#}{

1}{1}

1. {MENU} i {#}{1}{1}

2. To activate the remote operation feature, enter a 3-digit

remote operation ID.

L

To deactivate the remote operation feature, press {*}.

3. {SET} i {MENU}

Note:

L

You can also program this feature with the cordless handset
(page 44).

Setting the ringtone for
outside calls

*2

{#}{

1}{7}

{

1}

RINGTONE 1” (default)

{

2}

RINGTONE 2”

{

3}

RINGTONE 3”

{

4}

RINGTONE 4”

{

5}

RINGTONE 5”

{

6}

RINGTONE 6”

*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and

vice versa.

*2 This setting can be changed individually for the base unit and the cordless handset.

To set the cordless handset ringtone for outside calls, see page 52.

Feature

Feature code

Selection

Setting the journal
report to print
automatically

{#}{

2}{2}

{

0}

OFF”: The unit will not print a journal report, but will keep a

record of the last 30 fax transmissions and receptions.
{

1}

ON” (default): The unit will print a journal report automatically

after every 30 new fax transmissions and receptions (page 31).

Sending documents
overseas

{#}{

2}{3}

If you cannot send a fax overseas even if the number is correct
and the line is connected, activate this feature before sending the
fax.
This feature improves the reliability by reducing the transmission
speed.
{

0}

OFF”: Deactivates this feature.

{

1}

NEXT FAX”: This setting is effective only for the next

attempted fax transmission. After transmission, the unit will return
to the previous setting.
{

2}

ERROR” (default): When the previous fax transmission fails

and you wish to re-send the document.

Note:

L

Calling charges may be higher than usual.

Feature

Feature code

Selection

FC225-226AL-PFQX2518ZA-en.book Page 47 Friday, June 23, 2006 4:08 PM

This manual is related to the following products: