Installation, 7 ink film, Ink film – Panasonic KX-FC225NZ User Manual
Page 13: 7 ink film
1. Introduction and Installation
13
Installation
1.7 Ink film
The included film roll is a starter ink film.
1
Open the front cover.
2
Release the back cover by pushing the green button
(
1).
3
Open the back cover.
4
Insert the blue gear of the ink film roll into the front
left slot of the unit (
2) and the white gear of the ink
film roll into the rear left slot of the unit (
3).
L
The ink film is safe to touch and will not rub off on
your hands like carbon paper.
L
Make sure the blue gear (
2) and white gear (3)
are installed as shown.
5
Turn the blue gear (
4) in the direction of the arrow
until the ink film is tight (
5) and at least one layer of
ink film is wrapped around the blue core (
6).
1
3
2
4
5
FC225-226AL-PFQX2518ZA-en.book Page 13 Friday, June 23, 2006 4:08 PM