Philips AZ5836 - Manual (Page 12)

12
English
Preparations
Setting language preference
You can select your preferred language settings
so that this DVD Soundmachine will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the language
set by default will be used instead.
1
In disc mode, press SYSTEM MENU.
2
Select LANGUAGE SETUP icon and
press 4.
3
Press 5 / 4 keys on the remote control to
select your preferred option.
➜ Move to one of the following and press
B
.
– OSD LANGUAGE
– MENU LANGUAGE
4
Press
5 / 4 to select a language and press OK.
5
Repeat steps 3~4 for other settings.
To remove the menu
Press SYSTEM MENU.
1
In disc mode, press SYSTEM MENU.
2
Select SYSTEM SETUP icon and press
4 .
3
Press 5 / 4 keys on the remote control to
toggle through the functions and select your
preferred option.
➜ Move to “TV System” and press á.
NTSC
– Select this if the connected TV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PAL
– Select this if the connected TV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
AUTO
– Select this if the connected TV set is
compatible with both NTSC and PAL (multi
system). The output format will be consistent
with the video signal of the disc.
4
Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
AZ5836_58_P01-31_Eng 2008.3.13, 10:29 12