Using a dos diskette with the updated lan.cfg file – Polycom DOC2237A User Manual
Page 59
MGC Hardware and Installation Manual
2-39
The MCU Properties dialog box opens.
b.
Enter the IP address of the MCU as you have defined in the IP
Configuration.
c.
Click OK.
Using a DOS Diskette with the Updated LAN.CFG File
1.
Using Windows Notepad, create a new text file with the following text:
IP_ADDRESS = aaa.bbb.ccc.ddd
NETWORK_MASK = aaa.bbb.ccc.ddd
DEFAULT_GATEWAY = aaa.bbb.ccc.ddd,
where aaa, bbb, ccc, and ddd are numbers between 0 to 255, as follows:
Table 2-3: IP Configuration Options
Option
Description
IP Address
Enter the IP address allocated to the MCU by
the network administrator.
Subnet Mask
Enter the IP address of the subnet mask.
Default Gateway
Enter the IP address of the default gateway.
The current MCU name.
To modify, type a new
name
MCU IP address. Enter
the IP address of the MCU
as allocated by the
network administrator