Polycom DOC2237A User Manual
Page 58
Chapter 2 - Hardware Installation
2-38
11. Click OK.
12. Exit the MGC Manager and switch OFF the MCU.
13. Disconnect the MCU from the cross-over cable.
14. Connect the MCU to your site’s network.
15. Switch ON the MCU.
a.
Right-click the MCU icon, and then click Properties.
Table 2-2: IP Configuration Options
Option
Description
IP Address
The system displays the currently defined IP
address. Enter the IP address allocated to the
MCU by the network administrator.
Subnet Mask
Enter the Subnet Mask of the MCU.
Default Gateway
Enter the IP Address of the default gateway/
router.