Snmp mib objects, Overview, E snmp mib objects – Paradyne 3161-B3 User Manual
Page 215: Appendix e, Snmp mib, Objects
![background image](/manuals/187132/215/background.png)
3160-A2-GB21-90
February 2001
E-1
E
SNMP MIB Objects
Overview
This appendix describes the Management Information Base (MIB) objects that are
supported by the DSU/CSU and provides a correlation between front panel
commands and MIB objects (
Table E-1, SNMP MIB to Front Panel Command
).
The DSU/CSU supports the following MIBs:
T
Defines the general objects for use in Transmission Control Protocol/Internet
Protocol (TCP/IP) internets and provides general information about the
DSU/CSU.
T
Defines objects for managing DS1 interfaces and supports the network and
DTE Drop/Insert (DSX-1) interfaces on the DSU/CSU.
T
Defines objects for managing RS-232-type interfaces and supports
synchronous data ports (PORTs 1– 4) and management communication ports
(AUX, MODEM, and COM ports) on the DSU/CSU.
T
Generic-Interface MIB Extensions (RFC 1229)
An extension to MIB II that defines additional objects for control of generic
interfaces in MIB II. It supports control of tests on the DTE Drop/Insert
(DSX-1) and synchronous data interfaces that are not supported by other
MIBs.
T
Defines objects that are unique to devices such as Model 316x DSU/CSUs.