Promise Technology UltraTrak100 TX8 - Manual (Page 33)

27
D
EFINE
A
RRAY
The Define Array menu defines array parameters for the selected array. An array
number is selected by using the up/down key to select the array number field. The
SEL key is then used to select array number 1-4.
The parameter to be configured, RAID Level or Stripe Block size, is then selected
with up/down keys. Once the parameter is selected, the value is selected with the
up/down keys and then set by hitting the SEL key. If the Exit key is hit instead of
the SEL key the parameter value is not modified and the user may then select a
different parameter.
RAID Level
Stripe Block Size " This feature is not available in RAID 1.
GB Boundary ON
Add/Remove Drives
Save Changes
Press or to move these items on the LCD.
What you can do:
Press SEL: Selects one of the following active functions:
RAID Level
Moves the display to the RAID Level menu.
Stripe Block Size
Moves the display to the Stripe Block Size menu.
GB Boundary ON
Toggles between ON and OFF.
Add/Remove Drives
Moves the display to the Add/Remove Drives menu.
Save Changes
Moves the display to the Save Changes menu.
Press :
Moves the active message line up. (Active is marked by *.)
Press :
Moves the active message line down. (Active is marked by *.)
Press EXIT: Returns to the Configure Array menu.
You will see the following message if the array is already defined:
No Free Disk
What you can do:
Press SEL: Pressing SEL will save the array.
Press :
Does nothing.
Press :
Does nothing.
Press EXIT: Press EXIT to cancel this function and return to the Configure Array
menu.