Paxar MPCL II - Manual (Page 12)

MPCLII Graphics Manual
2-2
Exceeds
limit
Exceeds
limit Does not
exceed
limit
0.5” Does not
exceed
limit 0.5”
Designing Bitmapped Images________________________________
Once you determine the encoding method to use, you can begin mapping out
your graphic image.
NOTE: The image that you map must be an upside down mirror image of the
final result.
Special Considerations
Solid black print cannot exceed 20% (for the 9490 / 9494 printers) or 30%
(for the 9446 / 1460/ 6030 printers) of any given square inch of the
supply. If your black print exceeds this limit, you may lose data or damage the
printer.
In the first label, the large “M” logo and thick black line exceed the allowed
black to white print ratio. In the second label, the large “M” logo does not
exceed the black to white print ratio.
--------------- 2 inches -------------- --------------- 2 inches --------------