Philips DA1102 - Manual (Page 10)

DA11 Operation
6
MODEL DA11
The LavryBlack DA11 features:
- Ultra low jitter mode.
- Patent Pending >PiC< Playback Image Control™.
- Accepts input sample rates between 30kHz and 200kHz.
- Potentiometer-free digitally controlled analog volume circuitry.
- High power discrete headphone output.
- XLR, USB, RCA (Coaxial) and Optical (Toslink) digital inputs.
- Optional Infrared Remote control
- Power On/Off muting protection on Main XLR and Headphone outputs
- Balanced or unbalanced outputs with Polarity Inversion
- Included XLR to RCA adapters for easy connection to RCA inputs
CONNECTIONS
CAUTION: Care must be taken when connecting the DA11 directly to the input of a power
amplifier or powered monitors to avoid speaker damage. It is suggest that before making any
connections, the DA11’s Volume setting be reduced to a low value (“00” to “05”). Please switch
OFF or disconnect power to all devices in your system before making input and output
connections to the DA11, except the USB port. See the section titled USB INPUT for details.
Connect a stereo digital audio INPUT from your source using any or all of the following:
- AES source using an XLR cable to the XLR connector.
- Stereo optical source using a Toslink fiber to the OPTICAL connector.
- SPDIF source using a coaxial RCA cable to the RCA connector.
Note:
All these connectors can receive either AES/EBU (professional format) or SPDIF (consumer
format). For example, an XLR to RCA adapter can be used to feed a coaxial SPDIF signal to the
XLR input.