Philips PXG10 - Manual (Page 7)

4. PROJECTOR FEATURES
1. ADVANCED COMPATIBILITY WITH HIGH-END
WORKSTATIONS AND PCS
Compatible with up to 130 Hz vertical refresh rate, Sync on
Green and Composite Sync signals for use with a wide
variety of high-end PCs and Workstations. (Page 11)
2. FOR USE WITH DTV*
Allows projection of DTV images and 16:9 wide-screen
images when connected to a DTV decoder or similar video
systems. (Page 12)
3. BNC TERMINALS FOR COMPONENT AND RGB INPUT
Equipped with BNC terminals for connection to a DTV
decoder, DVD player and similar video systems for higher
quality images. An RCA adapter can also be used with the
BNC terminals. (Page 12)
4. 3-D Y/C DIGITAL COMB FILTER
Provides high quality images with minimal dot crawl and
cross colour noise.
5. POWER ZOOM AND FOCUS FUNCTION
Features a 130% power zoom function that allows you to
easily adjust the screen size with the remote control. Use
these functions when adjusting the projection distance to
achieve a 102 to 762 cm (40 to 300 inches) screen size.
(Page 9)
6. DIGITAL KEYSTONE CORRECTION
Digitally adjusts an image that is projected at an angle
while maintaining image quality and brightness. (Page 9)
7. EASY-TO-USE GRAPHICAL USER INTERFACE (GUI)
A multi-colour, icon based menu system allows for simple
image adjustments. (Page 15)
8. USER-FRIENDLY DESIGN
The two-colour design along with an intuitive Graphical
User Interface (GUI) makes this projector very easy to set
up and adjust.
9. AUTO SYNC TECHNOLOGY FOR AUTOMATIC IMAGE
PERFECTION
Automatically makes any necessary adjustments for
perfectly synced computer images. (Page 17)
10. INTELLIGENT COMPRESSION AND EXPANSION
By using intelligent resizing technology, this projector can
display higher and lower resolution images in detail without
compromising quality.
11. XGA RESOLUTION FOR HIGH RESOLUTION
PRESENTATIONS
With XGA (1,024 x 768) resolution, this projector can
display very detailed presentation information.
12. UXGA COMPATIBLE
UXGA (1,600 x 1,200) resolution images are intelligently
resized to 1,024 x 768 for full-screen or default
presentations.
* DTV is the umbrella term used to describe the new digital
television system in the united states.
CAUTIONS CONCERNING THE SETUP OF THE
PROJECTOR
For minimal servicing and to maintain high image quality,
PHILIPS recommends that this projector be installed in an area
free from humidity, dust and cigarettesmoke. If the projector is
used in these environments, the lens and filter will need to be
cleaned (or the filter replaced) more often, and internal
cleaning may become necessary. As long as the projector is
regularly cleaned,use in these environments will not reduce
the overall operation life of the unit. Internal cleaning should
only be performed by a Philips Authorised LCD Projector
Dealer or Service Centre.
NOTES ON OPERATION
•The exhaust vent,the lamp cage cover and adjacent areas
may be extremely hot during projector operation. To prevent
injury, do not touch these areas until they have sufficiently
cooled.
•Allow at least 10 cm (4 inches) of space between the cooling
fan (exhaust vent) and the nearest wall or obstruction.
•If the cooling fan becomes obstructed, a protection device
will automatically turn off the projector lamp. This does not
indicate a malfunction. Remove the projector power cord
from the wall outlet and wait at least 10 minutes. Then turn
on the power by plugging the power cord back in. This will
return the projector to the normal operating condition.
TEMPERATURE MONITOR FUNCTION
If the projector starts to overheat due to setup problems or a
dirty air filter,“TEMP.” and “
” will flash in the lower-left
corner of the picture. If the temperature continues to rise,the
lamp will turn off,the Temperature warning indicator (Temp.) on
the projector will flash,and after a 90-second cooling-off period
the power will shut off. Refer to “Lamp / Maintenance
Indicators ” on pages 25-27 for details.
Note:
The cooling fan regulates the internal temperature,and its
performance is automatically controlled. The sound of the fan
may change during projector operation due to changes in the
fan speed.
104 F
('40 C)
41 F
('5 C)
5
English