Philips PXG10 - Manual (Page 23)

8. OPERATION
Other settings
21
English
Picture display mode
This function allows you to modify or customise the picture
display mode to enhance the input image. Depending
on the input signal, you can choose NORMAL, WIDE, DOT BY
DOT, DOT BY DOT (WIDE), or FIT TO SCREEN image.
– Each time V-FORMAT is pressed, the picture mode changes
as shown below.
DTV COMPUTER
Mode 4:3 16:9 SXGA
Input signal 480 P 720 P
NORMAL 1024x768 1024x576 960x768
WIDE 1024x576 – 1024x768
DOT BY DOT 640x480 1280x720 1280x1024
DOT BY DOT (WIDE) 853x480 – –
Notes:
– “FIT TO SCREEN” is displayed only when SXGA signals that
are not in 4:3 aspect ratio are input.
– DOT BY DOT mode displays images in their native resolution
and not expanded to fit the LCD resolution.
NORMAL WIDE DOT BY DOT DOT BY DOT (WIDE)
For DTV decoder RGB signal in 4:3 aspect ratio
For DTV decoder RGB signal in 16:9 aspect ratio
For COMPUTER/RGB signal in 4:3 aspect ratio