Philips PXG10 - Manual (Page 29)

9. ADDITIONAL INFORMATION
Maintenance
CAUTION!
– To avoid injury to yourself and damage to the lamp, be sure
to carefully follow the steps below.
– Before or after replacing the lamp, be sure to clean the air
filters. See page 25 for cleaning the air filters.
Resetting the lamp timer
1.
Connect the power cord.
– Plug the power cord into the AC socket of the projector.
2. While pressing 4, 2 and OK on the projector, press Power
ON on the projector.
– ‘Lamp 0000H’ is displayed, indicating that the lamp timer is
reset.
KENSINGTON LOCK
This projector has a Kensington Security Standard slot for use
with a Kensington Micro Saver Security System. Refer to the
information that came with the system for instructions on how
to use it to secure the projector.
) )
27
English
Kensington
Security
Standard connector