Philips PXG10 - Manual (Page 21)

8. OPERATION
Personal preferences/Other settings
3. Press 3 / 4 to select “Save Setting”, and then press OK.
4. Press 3 / 4 to select the desired memory location of the
setting.
5. Press OK to save the setting.
6. To exit from the GUI, press Menu.
Selecting a saved setting
1. Press Menu.
2. Press 1 / 2 to select “Fine Sync”.
3. Press 3 / 4 to select “Select Setting”, and then press 2.
4. Press 3 / 4 to select the desired memory setting.
5. Press OK to select the setting.
6. To exit from the GUI, press Menu.
Notes:
– If the memory position has not been set, the resolution and
frequency will not be displayed.
– When selecting the stored adjustment setting with “Select
Setting”, the computer system should match the stored
setting.
OTHER SETTINGS
Reverse/Invert Image Function
This projector is equipped with a reverse/invert image function
which allows you to reverse or invert the projected image for
various applications.
Front Normal image
Ceiling+Front Inverted image
Rear Reversed image
Ceiling+Rear Reversed and inverted image
1. Press Menu.
2. Press 1 / 2 to select “PRJ Mode”.
3. Press 3 / 4 to select the desired projection mode.
4. Press OK to save the setting.
5. To exit from the GUI, press Menu.
SCREEN
SCREEN
SCREEN
SCREEN
19
English