Polycom SpectraLink 1725-36028-001 - Manual (Page 77)

16
Menu Programming (no
softkeys)
If your system is utilizing any SpectraLink Wireless Telephones that
do not have softkeys (PTB800 series or earlier),
Menu Programming is
used to enable these handsets to display a list of system features that
have been programmed for end user access.
The handset displays a menu of functions when the
FCN key is
pressed. The menu should match the feature programming
established in the
Feature Programmin g screen for analog systems or
in the PBX for digital systems per the LinkPlus Interface Guide for your
PBX.
The handset displays four menus as the
FCN key is pressed
repeatedly. Each menu has two display lines that are programmed in
the
Menu Programming screen, which displays all four menus at once.
The default factory settings are for features most commonly accessed
by users of the type of PBX installed with the SpectraLink 8000
System. The sample screen shows default menus:
All of the settings can be customized to conform to the feature
programming established at the site. Each SpectraLink 8000
Telephony Gateway should be programmed with identical menus.
PN: 1725-36028-001_T.doc 77