Polycom SpectraLink 1725-36028-001 - Manual (Page 69)

Telephone Line Configuration
A handset may be associated with one and only one telephone line.
The same MAC address may not be assigned to two or more
telephone lines.
Deleting a Handset
To delete a handset from the SpectraLink 8000 Telephony Gateway
configuration:
1. Navigate to the
NetLink Wireless Telephone System menu of the
SpectraLink 8000 Telephony Gateway that serves the port for the
line being used by the handset. Select
Telephone Line
Configuration.
2. Use the arrow keys to highlight the line to be deleted.
3. Press D to delete the handset information.
4. Press Y to accept changes.
5. Press Esc to return to the
NetLink Wireless Telephone System
menu.
If the SpectraLink 8000 Telephony Gateway has been programmed
in the
Feature Programming menu for the ADMIN function, a
handset may be added or deleted via another handset. See the
later section on Feature Programming for information about
programming and using this feature.
PN: 1725-36028-001_T.doc 69