Philips C922 User Manual

Page 33

Connecting the

Docking Station

Insert the pedestals in the holes provided in the base of the
docking station (1), and slide them into place. Insert the con-
necting cable of the AC adapter supplied in the jack (2). Plug
the AC adapter into the 230 V mains socket.

If you are using a PC together with the docking station, connect
the V.24 connection jack (3) to a free COM port interface of your
PC (cable supplied). A headset is connected to the jack (4).

Connecting the

Handset

When you place the handset in the charger of the docking sta-
tion, make sure that the contacts in the charger make correct
contact with those of the handset. If the display lights up briefly
a secure contact is made. Once the handset is placed in the
docking station, you will be able to use all of its functions.

Note

Please use the docking station either with a headset or in
handsfree mode.

Handsfree
Operation

Use

nated. To make a call, leave the handset in the docking station
and press

h. The microphone and loudspeaker are acti-

vated. You can now dial a telephone number. If you receive a
call, press

h. The loudspeaker and microphone are acti-

vated.
The volume of the loudspeaker can be controlled by pressing
the

+/- keys on the handset.

Please do not cover the microphone, which is located at the
forward edge of the docking station.
The

H LED indicates the connection status.

If you remove the handset from the docking station during a
connection, you will be able to continue your conversation
without any form of interruption.