Accessories, Attaching/using the belt clip, Attaching/ using the belt clip – Philips C922 User Manual

Page 31

Accessories

Attaching/

using the

Belt Clip

Install the belt clip on the back side of the handset.

Note: The adapter ring will be fixed permanently to the hand-
set; it cannot be removed again.

Attaching the Adapter:

• Release the round cap by pressing and turning it clockwise

(1) with your thumb and then remove it (2).

• Insert the adapter ring with the fasteners in the opening (3)

and then turn it a quarter-circle counter-clockwise until it
snaps into place (4).

Attaching the Belt Clip

• Press the upper ends of the belt clip together, as illustrated

(5), slide it onto the belt and release the clip ends.

Attaching the Handset to the Clip

• Use the adapter ring to fasten the handset into the belt clip

until it snaps into place (6).

Removing the Handset from the Belt Clip

• Push the release button (7) and pull the handset up out of the

belt clip (8).