Philips C922 - Manual (Page 25)

23
Registering the
Handset with
the DECT
System
$Subscriptions$ OK Next Repeatedly New
Z
PAR K OK
Z
A uthentication C od e OK
Z
S ys tem na me OK
Z
Lo c al teleph on e num ber OK
c
During registration, you must make the following entries:
Enter PARK: You only need to enter the PARK if your handset is
to be operated in a specific DECT system (e.g. in locations
where the radio signals of two DECT systems overlap). If not
necessary, press
OK to skip this setting.
Enter Authent. Code: You register your handset with this code.
Enter Name: Enter the name of the DECT system with which you
are going to be registered. This is always shown when the dis-
play is at idle. For entering characters, refer to page 22.
Enter Local Number: Some DECT systems transmit your reserved
telephone number. If this is not the case, you can enter it here
(refer to your system administrator for the telephone number).
Selecting the
DECT System
$Subscriptions$ OK
C
Select system Next
Repea tedly Select
c
If you have registered the handset with several DECT systems,
you can select which one your handset should use. Use the
arrow key to select the system before you press
Select .
Automatic
System Search
$Automatic$Search$ OK
C
ON / Off OK
c
If you have registered your handset with several DECT systems
and this function is active, then the handset will select one of
the DECT systems automatically. Thus, your handset is automat-
ically “logged-in” to another of your registered DECT systems,
as soon as you move out of the effective range of the current
system.