beautypg.com

2 restore configuration – Planet Technology GRT-101 User Manual

Page 71

background image

PLANET Technology Corp.

GRT-101/401 User

’s Manual

- -

66

Showing System Configuration...

setup mode Route

setup shdsl mode STU-R

setup shdsl n*64 0

setup shdsl type Annex_A

setup shdsl margin 0

setup wan 1 protocol IPoA

setup wan 1 address 192.168.1.1 255.255.255.0

setup wan 1 vpi_vci 0 32

setup wan 1 encap LLC

setup wan 1 qos class UBR

setup wan 1 qos pcr 2400

setup wan 1 isp test test 10

...

admin snmp trap 3 edit Disable 192.168.0.254 private

admin snmp trap 4 edit Disable 192.168.0.254 private

admin snmp trap 5 edit Disable 192.168.0.254 private

admin#

After dumping the configuration, use the copy and paste function provided by

your terminal access program or Telnet program to save it to a text file. Don

’t

miss any script command line, or you would loss part of the configuration.

Note: With

“show script” command, the password is printed with “*” instead of the real password characters for security.

Therefore, the backup configuration does not contain the password information. Remember to recover correct

password information manually after the backup procedure by a text editor. There is no command that could show the

password information. You should save your password in a safe place for any eventuality.

3.17.2 Restore configuration

Before you restore the old configuration back to GRT-101/GRT-401, make sure

to clear the whole setting back to the factory defaults first with the following

command:

admin# setup default

Are you sure? (y/n): y

Set OK!

admin#

To restore the configuration, copy the content of the whole configuration file,

which was saved according to section 3.17.1 Backup configuration, and paste

This manual is related to the following products: