4 setting up the hardware environment – Planet Technology GRT-101 User Manual
Page 11

PLANET Technology Corp.
GRT-101/401 User
’s Manual
- -
6
Figure 2-2 Direct Connection with PC or NB
Figure 2-4 Connection with Switch or HUB
2.4 Setting up the hardware environment
Step 1: Connect the power adapter to the port labeled DC-IN on the rear
panel of the product.
Step 2: Connect the Ethernet cable.
If GRT-101 is directly connected to PC, the Ethernet cable has to be
used cross over one (refer to figure 2-3). If the product is connected
to hub or switch, be sure that the hub or switch supporting
PC
NB
Wall Jack
Power
Adapte
r
RJ-45
cable
DB-9
Cable
Wall Jack
RJ-45 cable
Server
File Server
PC
NB
Power
DB-9
Workstation
HUB/Switch
Mobile
Device
Wireless LAN
This manual is related to the following products: