Planet Technology GRT-101 - Manual (Page 19)

PLANET Technology Corp. GRT-101/401 User ’s Manual
- - 14
3.3.3 Routing Mode for IPoA or EoA
Web UI Configuration
For Route Mode with Classical IP over ATM
and Ethernet over ATM, follow the following
setting. First select ROUTE and then click
Next for setting others parameters.
Enter VPI: 0 and VCI: 33
Select: IP over ATM or Ethernet over ATM
Click Next
Enter WAN1 IP: 10.1.2.1
Enter WAN1 Subnet Mask: 255.255.255.0
Enter LAN IP: 192.168.0.1
Enter LAN Subnet Mask:255.255.255.0
Enter Default Route Gateway: 10.1.2.2
For DHCP enable setting, refer to DHCP
setting of Routing Mode with PPPoA or
PPPoE with IP Sharing .
Click Next
Click OK to write the new configuration data to
the flash memory.