beautypg.com

Modifying the factory default management, Network settings on the usb key -8 – Polycom RMX DOC2560B User Manual

Page 40

background image

Chapter 2-First Time Installation and Configuration

2-8

Modifying the Factory Default Management Network
Settings on the USB Key

The USB key contains a text file, lan.cfg, which holds the factory default IP

address parameters. These parameters must be modified to your local

network settings using the LAN Configuration Utility, also on the USB key.
To modify the USB key settings:
1

Take the USB Key from the Installation Accessories kit and insert it into

the PC workstation and double-click LanConfigUtility.exe to start

the utility.
The LAN Configuration Utility dialog box opens.

2

Modify the following parameters in the utility’s dialog box using the

information supplied by your network administrator.

Control Unit IP Address

Shelf Management IP Address

Subnet Mask

Default Router IP Address

3

Click OK.

4

Remove the USB Key from the PC.

The USB key is required for first entry power-up.