beautypg.com

Personal conference manager (pcm), Guidelines, Personal conference manager (pcm) -87 – Polycom RMX DOC2560B User Manual

Page 165: Guidelines -87

background image

Polycom RMX 1500/2000/4000 Getting Started Guide

3-87

Personal Conference Manager (PCM)

The Personal Conference Manager (PCM) interface enables the conference

chairperson to control various conference features using his/her

endpoint’s remote control device.
The following conference operations can be performed:

Initiate Polycom’s Click&View™ application to change the local

screen layout.

Invite a participant to connect to the conference.

View and control the audio and video of each connected endpoint.

Camera Control - control the camera of a remote endpoint using

(FECC).

Control the camera of a connected endpoint.

Video Force a specific participant to a specific window of the video
layout.

Initiate and control recording of the conference.

Disconnect a participant.

Terminate the conference.

Guidelines

PCM is only supported with MPM+ cards.

PCM is only available in CP conferences.

Although the RMX can host up to a maximum of 800 conferences

(depending on the RMX model) PCM can only be activated from 4

conferences per MPM+ card.

An RMX 2000 with 2 MPM+80 cards installed can host a total of

8 PCM sessions while an RMX 4000 with 4 MPM+80 cards

installed can host a total of 16 PCM sessions.

If 4 PCM sessions are active on an MPM+ card and a chairperson

of another conference, hosted on the same MPM+ card, attempts

to start an additional PCM session, a message indicating

insufficient resources is displayed and FECC is activated.

When PCM is active, FECC can only be performed by the chairperson

using PCM’s Camera Control menu.