Polycom RMX DOC2560B - Manual (Page 172)

Chapter 3-Basic Operation
3-94
PCM Main Menu - Level 1
Click&View
With the Click&View application, participants can change their Personal
Layouts using the Arrow Keys or DTMF codes entered using the Numeric
Keys of their endpoints.
For a full description of Click&View see "Personal Layout Selection with
Click&View” on page 3-82 .
Invite Participant
This function is not available to chairpersons using PCM with ISDN
endpoints.
To invite a participant to connect to the conference:
1
Use the Up/Down arrow keys to select Invite Participant in the Main
Menu and then press the Right arrow or # key to confirm your
selection.
or
Press the 2 key on the Remote Device.
The Invite Participant sub menu is displayed.
2 Use the Numeric Keys to enter the number of the participant’s
endpoint.
3 Press the # key to initiate the call.
4 Optional.
a
Use the Down arrow to select the Auto button to select from the
following dialing methods: