Panasonic DMR-HS2 - Manual (Page 61)

A
d
v
a
nc
e
d
op
e
ra
tion
61
RQT6570
Video Seamless Play
Turn seamless play on or off on discs with play lists.
≥ Seamless Play does not effect programs that have been
recorded with LPCM sound.
≥ On: The scenes in play lists are played seamlessly. This may
cause shifting of the points where scenes change. Some
play lists cannot be played seamlessly.
≥ Off: The points where scenes in play lists change are played
accurately, but the picture may freeze for a moment.
Dubbing Aspect
You may set the aspect ratio for a picture to be viewed on a
4:3 television. Setting information is shown on the recording
drive (Setting cannot be made in High Speed mode). ≥ Squeeze: Full screen display
The picture will appear stretched in the vertical plane.
≥ Letterbox: A black bands will appear across the top and bottom
of the screen display.
Audio Audio during Search [HDD] [RAM] [DVD-R] [DVD-V] [VCD]
Choose whether to have sound during the first level of fast-forward.
≥ On ≥ Off
D. Range Compression [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
≥ On ≥ Off
Select MTS for DVD-R or LPCM ( ➜ page 30)
Select whether to record the main or secondary audio type
(SAP) when recording to DVD-R or when recording using
LPCM sound (“Audio Mode for XP Recording”
➜ below).
≥ Main ≥ SAP
Select Dubbing Audio to DVD-RAM
You can select the kind of sound when dubbing to DVD-RAM. ≥ Main + SAP ≥ Main ≥ SAP
(Available in all modes apart from High Speed mode when dub-
bing programs.)
Select Audio CH for DV input ( ➜ page 63)
You can select the kind of sound when recording from the
unit’s DV terminal.
≥ Stereo 1 ≥ Stereo 2 ≥ Mix
Audio Mode for XP Recording
Choose the audio type when recording with XP mode.
≥ Sound recordings made using LPCM require more information
than usual. Consequently the picture quality of LPCM record-
ings may be less than that of normal XP mode recordings.
≥ Dolby Digital ( ➜ page 66) ≥ LPCM ( ➜ page 66)
Digital Audio Output ( ➜ page 62)
PCM Down Conversion ≥ On ≥ Off
Dolby Digital ≥ Bitstream ≥ PCM
DTS ≥ Bitstream ≥ Off
Display Status Messages
Choose whether to show on-screen messages automatically. ≥ Automatic ≥ Off
Language of Display Message
Choose the language for these menus and the on-screen
messages. ≥ English ≥ Français
Blue Background
Select “Off” if you do not want to have the unit show the blue
background when reception is weak. ≥ On ≥ Off
FL Display
Changes the brightness of the unit’s display. ≥ Bright ≥ Dim
≥ Dim during Play: The display dims during play and when
the unit is turned off.
≥ Automatic: The display dims during play and goes off
completely when the unit is turned off (the power
consumed will be 0.6 W). If you press a button the
display will brighten briefly.
TV
Screen TV Aspect ( ➜ page 16)
Choose the setting to suit your television.
≥ 4:3 ≥ 16:9
TV Type ( ➜ page 16)
Choose “480P” to enable progressive output.
≥ 480I ≥ 480P
4:3 TV Settings for DVD-Video
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television. ≥ Pan & Scan ( ➜ page 66):
Video recorded for a widescreen is played as Pan &
Scan (unless prohibited by the producer of the disc).
≥ Letterbox ( ➜ page 66):
Video recorded for a widescreen is played in the letterbox style.
4:3 TV Settings for DVD-RAM
Select how DVD-RAM widescreen picture is shown on a 4:3
standard aspect television. ≥ 4:3: Programs played as recorded.
≥ Pan & Scan: Video recorded for a widescreen is played
as Pan & Scan.
≥ Letterbox: Video recorded for a widescreen is played in the
letterbox style.
Tabs Menus Options
!?
!?
!?
!?
!?
!?