Remote control keys – Philips TV Receiver User Manual

Page 9

Remote Control keys

Standby

To set the TV to standby mode. To switch

the TV set on again, press , to

or the + P(age) – key.
Mode selector

To activate the remote control in TV, DVD

or AUX mode (see page 6).
Cancel
In digital mode, it functions as an exit key for
MHEG teletext when no coloured key links
are available to exit teletext mode.
TV menu

To display or edit from the analogue menus.
Cursor

These 4 keys are used to move within

the menu or to directly access the screen

formats.
Analogue or Digital mode

To switch the television between analogue

and digital mode.
Volume + / –

To adjust the sound level.
Mute

To disable or enable the sound.
Numerical keys

For direct access to programmes. For a 2

(3) digit programme number, the second

(third) digit must be entered before the dash

disappears. The number, the name (and the

sound mode, in analogue mode) are displayed
for a few seconds.
Screen information

In digital mode, press the key once to

display the information banner and the

second time to exit information banner

(see page 11).

In analogue mode, display/remove the

programme number, the sound mode, the

remaining time of the sleeptimer and the

*signal strength indicator.
Teletext / Sound mode

In teletext mode, it functions as a teletext

key (see pages 27-28).

In TV mode, it is used to force programmes

in Stereo and Nicam Stereo to Mono or,

for bilingual programmes, to choose between

Dualåor Dual». The Mono indication is red

when in forced position.
Subtitle mode

In digital mode, it activates or deactivates

the subtitle mode.

* The signal strength indicator shows

the signal strength of the transmission

of the programme you are watching.