Philips TV Receiver - Manual (Page 26)

22
Using the Sleeptimer Feature
Sleep feature allows you to select a *time
period in which the set will switch to standby
mode automatically upon reaching the selected
time period. Select Off option to deactivate
feature.
Press the TV
MENU
key.
With the ï key, select Features and the
Æ /
OK
key to enter the Features menu.
Use the Н Ж key to select a time period.
To return to previous menu, press the
TV
MENU
key.
To exit the menu, press the key.
* time period
• 15, 30, 45 or 60 minutes.
OR
• 90 or 120 minutes
OR
• 180 or 240 minutes
NOTE : During the last minute of a Sleep time
setting, an on-screen countdown will be displayed.
Pressing any button on the remote control will
cancel the Sleep feature.
1
3
4
2
5
Using the Contrast+ and NR (Noise Reduction) features
Press the
TV
MENU
key.
With the ï key, select Features and the
Æ / key to enter the Features menu.
Use the О п keys to select Contrast+ or
NR (Noise Reduction) and the Н Ж keys
to select an On or Off option.
To return to previous menu, press the
TV
MENU
key.
To exit the menu, press the key.
Definition of the feature settings
Contrast+ :
– optimise the total contrast of the picture for
improved picture visibility.
– select On option to activate feature.
NR (Noise Reduction) :
– improves “noisy” picture (little dots on picture)
due to weak signal transmission.
– select On option to activate feature.
1
3
4
2
5
( Start Time: enter the start time.
§ Stop Time: enter the standby time.
è Program No.: enter the number of the
programme for the wake-up alarm.
! Activate: the settings include:
• Once for a single alarm,
• Daily for each day,
• Off to cancel.
ç Press to put the TV set in standby.
It will automatically come on at the time
programmed.
If you leave the TV set on, it will just change
programmes at the time entered (and will go
to standby mode at the Stop Time).
Timer function
This menu lets you use the TV set as an alarm.
& Press the
TV
MENU
key.
é With the cursor, select the Features menu
then Timer :
“ Sleep: to select an automatic standby
period.
‘ Time: enter the current time.
Note: the time is updated automatically
each time the TV set is switched on via the
teletext information on programme 1. If
this programme does not have teletext, the
update will not take place.
TV Menu
Picture
Sound
Features
Install
Timer
Sleep
Time
Start Time
Stop Time
Program No.
Activate
10:56
Ж
Ж
Ж
Ж
Ж