Philips TV Receiver - Manual (Page 17)

13
Test reception
This menu allows you to check the strengh of
the signal you are receiving through your aerial.
& From the digital mode, press the key to
display the setup menu.
é Use the ï key to select installation and press
Æ key to display the installation menu.
“ Use the ï key to select Test reception and
press Æ key. You obtain an indication of the
actual programme frequency, the network
name, the signal quality and strength.
‘ Use the Æ key to enter the Frequency slot
and use the to keys to enter the
frequency of the digital channel you want
to test. Use the Æ key to move to the next
character space. Your TV magazine can
provide the list of digital channel numbers.
Refer to the frequency table on page 34.
If after keying the frequency, the reception is
still poor, you can try improving, renewing,
adjusting or updating the aerial. It is however
advisable to contact a specialised aerial
installer in order to achieve best results.
( After entering the frequency, use the
key to exit Frequency slot.
§ To return to previous menu, press the Í key.
è Press the key to exit the menu.
Frequency
Network name
Signal quality
Signal strength Service lists
Service setup
Test reception
Setup 11:46
Test signal quality
Installation
Close
Language and location preferences
This menu allows you to select your preferred
language for audio, subtitle, teletext and menu
and make changes to the location (country
and time zone).
& From the digital mode, press the key
to display the setup menu.
é Use the ï key to select Preferences and
press Æ key.
“ Select Language, Location or Digital Audio
Output (ï) and press Æ key.
‘ Use the О п keys to select a setting and
press Æ key to enter into the sub-menu.
Make your adjustment and press key or
Í key to exit.
Language default settings
• Audio : to select the audio sound language.
• Subtitle/Teletext : to select the
subtitle/teletext language.
• Subtitling mode : off, on or auto (subtitle
only displayed in case of original audio
transmission).
• Subtitles for hearing impaired : to activate
or deactivate the specific subtitle for hearing
impaired (if made available by the broadcaster).
• System : to select the menu language.
Location settings
•
Country : to select the country where you
are located. CAUTION : if you select a wrong
country, the channel numbering will not be
according to the standard for your country and you
may not receive all services or nothing at all. Note
that the Language can be selected independently
from the Country.
• Time zone : to select the time zone where
you are located.
Digital Audio Output settings
To select AC3 (if the amplifier supports the
Dolby Digital format) or PCM/MPEG (if it
does not support Dolby Digital format).
Note : If you select AC3 sound, you must have
your TV connected to a Home Theatre System
or amplifier. In this mode, no sound will be
heard from the TV speakers only.
(
To return to previous menu, press the Í key.
§ Press the key to exit the menu.
Audio
Subtitle / Teletext
Subtitling Mode
Subtitling for hearing impaired
System Language
Location
Digital Audio Output
Setup 11:46
Select your preferred language
Preferences
Close