Phoenix Gold pmn - Manual (Page 28)

Introduction
1 - 8 Top View
1
Lid Sensor
This LCD lid sensor is activated when the LCD panel is closed. When activat-
ed, the default setting of your operating system’s power scheme sends the
computer into a power saving state (see
Figure 3 - 13 on page 3 - 20 ).
LED Status Indicators
These display the system’s operational status. Refer to “LED Status Indica-
tors” on page 2 - 2 for more information on what the lights mean.
Power Button
Press this button to turn your computer on or off. This button may also be used
as a suspend/resume key, once configured as such in the power management
control panel of your operating system (see
“Configuring the Power Button”
on page 3 - 20 ).
Forced Off
If the system “hangs”,
and the Ctrl + Alt + Del
key combination
doesn’t work, press the
power button for 4 sec-
onds, or longer, to
force the system to
turn itself off.
Shutdown
Please note that you should always shut your computer down by choosing the Shut
Down/Turn Off Computer command from the Start menu in Windows. This will
help prevent hard disk or system problems.