beautypg.com

Keeping the display in good condition, About the small fluorescent tube 70, Specifications 70 – Pioneer AVH-P6400 User Manual

Page 70: Additional information, Specifications, About the small fluorescent tube

background image

Additional Information

Keeping the Display in Good
Condition

• When removing dust from the screen or
cleaning the display, first turn the system power
OFF, then wipe with a soft dry cloth.
• When wiping the screen, take care not to
scratch the surface. Do not use harsh or abra-
sive chemical cleaners.

About the Small Fluorescent Tube

• A small fluorescent tube is used inside the
display to illuminate the LCD screen.

*The fluorescent tube should last for approxi-

mately 10,000 hours, depending on operat-
ing conditions. (Using the display at low
temperatures reduces the service life of the
fluorescent tube.)

*When the fluorescent tube reaches the end

of its useful life, the screen will be dark and
the image will no longer be projected. If
this happens, consult your dealer or the
nearest authorized PIONEER Service
Station.

Specifications

General

Power source ...................... 14.4 V DC

(10.8 – 15.1 V allowable)

Grounding system .............. Negative type
Max. current consumption

............................................. 10.0 A

Dimensions (W

× H × D):

(DIN) Chassis ............ 178

Ч 50 Ч 160 mm

[7

Ч 2 Ч 6-5/16 in]

Nose .................. 188

Ч 58 Ч 37.6 mm

[7-3/8

Ч 2-1/4 Ч 1−1/2 in]

(D)

Chassis ............ 178

Ч 50 Ч 165 mm

[7

Ч 2 Ч 6-1/2 in]

Nose .................. 178

Ч 50 Ч 32.6 mm

[7

Ч 2 Ч 1−1/4 in]

Remote control ........... 51.5

Ч 123 Ч 10.9 mm

[2-1/32

Ч 4-7/8 Ч 7/16 in]

Weight

Main Unit

AVH-P6400CD ..... 2.4 kg (5.3 lbs)
AVH-P6400 ........... 1.9 kg (4.2 lbs)

Remote control ........... 49.4 g (0.1 lbs)

(including battery)

Amplifier

Continuous power output is 27 W per channel min. into
4 ohms, both channels driven 50 to 15,000 Hz with no
more than 5% THD.
Maximum power output ..... 50 W

× 4

50 W

× 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for Subwoofer)

Load impedance ................. 4

Ω (4 – 8 Ω [2 Ω for 1 ch]

allowable)

Preout maximum output level/output impedance

............................................. 4.0 V/100

Equalizer (3-Band Parametric Equalizer):

(Low)

Frequency ............ 40/80/100/160 Hz
Q Factor ............... 0.35/0.59/0.95/1.15

(+6 dB when boosted)

Gain ..................... ±12 dB

(Mid)

Frequency ............ 200/500/1 k/2 k Hz
Q Factor ............... 0.35/0.59/0.95/1.15

(+6 dB when boosted)

Gain ..................... ±12 dB

En

70

14

Section

This manual is related to the following products: