Pioneer AVH-P6400 - Manual (Page 29)

En 29
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
07
Section
Multi-CD Player
Playing a CD
You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 30.
1
DISC NUMBER indicator
Shows the disc currently playing.
2 TRACK NUMBER indicator
Shows the track currently playing.
3 PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent track.
4
DISC TITLE
When playing a CD TEXT disc, the DISC
TITLE is displayed. With regular CDs that do
not usually have the titles recorded on them,
NO TITLE is displayed (refer to page 35).
1 Press SOURCE to select the multi-CD
player.
Press
SOURCE until you see Multi-CD displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
5 or ∞.
• Press
5 to select 1, 2, 3..., press ∞ to select 1,
6, 5...
4 To perform fast forward or reverse, press
and hold
2 or 3.
5 To skip back or forward to another track,
press
2 or 3.
Pressing
3 skips to the start of the next track.
Pressing
2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations, Ready is displayed.
• If the multi-CD player does not operate prop-
erly, an error message such as ERROR-11 may
be displayed. Refer to the multi-CD player
owner’s manual.
• If there are no discs in the multi-CD player
magazine, NO DISC is displayed. Depending
on the multi-CD player you use with this prod-
uct, the display may be blank.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
1 2 3
4