Pioneer AVH-P6400 - Manual (Page 32)

En 32
07
Section
Multi-CD Player
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press
5 or ∞ to select
PAUSE from the M-
CD MENU, and press A.MENU .
PAUSE ON/OFF indications are displayed.
2 Press
5 to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
3 Press
∞ to turn pause off.
Pause :OFF appears in the display. Play will
resume at the same point that you turned pause
on.
Using compression and bass
emphasis
You can use these functions only with a multi-CD
player that supports them.
Using COMP (compression) and DBE (dynamic
bass emphasis) functions let you adjust the
sound playback quality of the multi-CD player.
Each of the functions have a two-step adjust-
ment. The COMP function balances the output
of louder and softer sounds at higher volumes.
DBE boosts bass levels to give playback a fuller
sound. Listen to each of the effects as you select
through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press
5 or ∞ to select
COMP from the M-
CD MENU, and press A.MENU .
COMP adjustment indications are displayed.
• If the multi-CD player does not support
COMP/DBE,
NO COMP is displayed when you
attempt to select it.
2 Press
5 or ∞ to select your favorite setting.
Press
5 or ∞ repeatedly to switch between the
following settings:
COMP OFF — COMP 1 — COMP 2 — COMP OFF —
DBE 1 — DBE 2
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your
favorite tracks to the playlist you can turn on ITS
play and play just those selections.
Creating a playlist with ITS program-
ming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
When using a multi-CD player that does not
feature an ITS function, you cannot select
ITS
PLAY .
1 Play a CD that you want to program.
Press
5 or ∞ to select a CD.
2 Press
5 or ∞ to select
ITS MEMORY from
the M-CD MENU, and press A.MENU .
ITS MEMORY adjustment indications are dis-
played.
3 Select a desired track by pressing
2 or 3.
4 Press
5 to store the currently playing track
in the ITS MEMORY.
MEMORY is displayed briefly and the currently
playing selection is added to your playlist. The
display then shows
ITS again.