Pioneer AVH-P6400 - Manual (Page 23)

En 23
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
05
Section
Tuner
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press
5 or ∞ in the TUNER MENU to
select LOCAL , and press A.MENU .
LOCAL adjustment indications are displayed.
2 Press
2 or 3 to set the sensitivity
.
There are four levels of sensitivity for FM and
two levels for AM:
FM: OFF — 1 — 2 — 3 — 4
AM: OFF — 1 — 2
The 4 setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (Best Station Memory) lets you automati-
cally store the six strongest broadcast frequen-
cies. The stored frequencies are displayed.
Once stored in memory, you can easily select a
desired frequency from the displayed list (refer
to page 22).
1 Select BSM from the TUNER MENU, and
press A.MENU .
BSM adjustment indications are displayed.
2 Press
5 to turn
BSM on.
BSM begins to flash. While BSM is flashing the
six strongest broadcast frequencies will be
stored in order of their signal strength. When
finished,
BSM stops flashing.
• To cancel the storage process, press
∞
.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
• You can also use
5 and ∞ to recall radio sta-
tion frequencies assigned to PRESET TUNING
buttons.
• If there are fewer than six strong broadcast
frequencies, previously stored frequencies
may remain in memory.