Panasonic 5500 - Manual (Page 91)

3.3 Verification
3.3.1 Verify User Authentication
You can test user authentication for the ERS5600 users configured on IDE by entering the user
name and password.
Step 1 – Via Ignition Dashboard, select the IP address of the Ignition Server, click on the
tab, go to and select the tab. You can
also simple test user authentication as we did for the ERS8600 via the tab. Enter a valid
user name and password configured for the ERS5600 and click on
Via Dashboard, verify the following information:
Option Verify
Results If successful, you should get several messages indicating the internal
user lookup and authentication was successful providing you entered
the correct user name and password.
___________________________________________________________________________________________________________________________
90