Philips HTS8000S - Manual (Page 42)

42
3139 115 2xxx1
English
Sound and Volume Controls
SUBWOOFER
SONOWAVE
SUBW
SURR
SOUND
MUTE
VOL +-
Speakers (SonoWave)
adjustment
You can adjust the SonoWave speakers
setting according to your room
environment and setup for optimum
performance.
IMPORTANT!
The SonoWave speakers must be
placed at equal distance from the
TV.
1
Press SONOWAVE on the remote.
➜
There are three parameters to adjust
the SonoWave speakers : “
ROOM
ACOUSTICS”, “SPEAKER DISTANCE”
and “
LISTENING POSITION”.
2
Use 3 4 keys to select one of the
options and press OK to adjust the
setting.
{
ROOM ACOUSTICS }
●
Use 3 4 keys to select the condition of
the room and press OK to confirm.
➜
“
HARD” for concrete/glass walls.
➜
“
SOFT” for wooden walls.
{
SPEAKER DISTANCE }
●
Use 3 4 keys to select the distance
(refer to ‘X’ in the below diagram)
between the two SonoWave speakers
and press OK to confirm.
➜
“
NEAR” – ‘X’ is less than 1m
➜
“
DEFAULT” – ‘X’ is between 1m to
2.5m.
➜
“
FAR” – ‘X’ is more than 2.5m.
{
LISTENING POSITION }
●
Use 3 4 keys to select the distance
(refer to ‘Z’ in the below diagram) from
the listening position and press OK to
confirm.
➜
“
NEAR” – ‘Z’ is less than 1.5m
➜
“
DEFAULT” – ‘Z’ is between 1.5m to
2.5m.
➜
“
FAR” – ‘Z’ is more than 2.5m.
FRONT R FRONT L
TV
X
Z
3
Press SONOWAVE again to exit the
setting or it will exit automatically if you
do not press any buttons within 10
seconds.
001-049 HTS8000S-00-Eng 22/04/2005, 04:07 PM 42