Philips HTS8000S - Manual (Page 25)

English
25
3139 115 2xxx1
Playing a disc
1
Press SOURCE button until “
DISC”
appears on the display panel.
2
Turn on the TV power and set to the
correct Video In channel. (See page 20
“Setting the TV”).
➜
You should see the blue DVD
background screen on the TV.
3
Insert a disc into the disc slot.
➜
Make sure the disc label is facing out.
For double-sided discs, load the side you
want to play facing out.
➜
When loading an 8cm disc, slot into
the middle of the disc loader.
EJECT
4
Playback will start automatically.
➜
If a disc menu shows on the TV, see
page 26 “Using the Disc Menu”.
➜
If the disc is locked by parental control,
you must enter your six-digit password.
(see pages 37~38).
5
To remove the disc, press EJECT (or hold
down the Ç button on the remote).
Auto Eco Power standby mode
This is a power-saving feature, the system
will automatically switch to Eco Power
standby mode if you do not press any
buttons within 30 minutes after a disc has
stopped playing.
Disc Operations
(continued)
Basic playback controls
Pausing playback
●
During playback, press 2;
(PLAY PAUSE).
➜
To resume normal playback, press the
same button again.
Selecting another track/chapter
●
Press S / T (PREV / NEXT) or
use the numeric keypad (0-9) to key in
a track/chapter number.
➜
If repeat track mode is active, pressing
S / T will replay the same track/
chapter.
Searching backward/forward
●
Press and hold S / T (PREV /
NEXT).
➜
While searching, pressing S / T
again will decrease/increase the search
speed.
➜
To resume normal playback, press 2;
(PLAY PAUSE).
Stopping playback
●
Press Ç (STOP).
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM 25