Philips HTS8000S - Manual (Page 36)

36
3139 115 2xxx1
English
DVD Setup Menu Options
(continued)
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press
1. To remove the menu, press SETUP MENU.
Picture Setting
This DVD system provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
1
In ‘Video Setup Page’, use 34 keys to
highlight { Picture Setting }, then press
2.
{ Standard }
Select this for original colour setting.
{ Bright }
Select this for vibrant colour setting.
{ Soft }
Select this for warm colour setting.
{ Personal }
Select this to personalise your picture colour
by adjusting the brightness, contrast, tint and
colour (saturation).
2
Use 34 keys to select a setting and press
OK to confirm.
3
If you select { Personal }, then proceed
to steps
4
~
7
.
➜
The ‘Personal picture setup’ menu
appears.
Brightness
Contrast
Tint
Color
Personal Picture Setup
4
Use 34 keys to highlight one of the
following options.
{ Brightness }
Increase this value to brighten the picture
colour or vice versa. Choose zero (0) for the
average setting.
{ Contrast }
Increase this value to sharpen the picture
colour or vice versa. Choose zero (0) to
balance the contrast.
{ Tint }
Increase or decrease this value to change the
colour phase of the picture. Choose zero (0)
for the average setting.
{ Color }
Increase this value to enhance the picture
colour or vice versa. Choose zero (0) to
balance the colour.
5
Press
1 2 to adjust the setting that best
suit your personal preference.
6
Repeat steps
4
~
5
to adjust other
settings.
7
Press OK to confirm.
Setting the Video Output
Choose the type of video output that
matches the video connection between
the DVD system and your TV.
1
In ‘Video Setup Page’, use 34 keys to
highlight { Component }, then press
2.
{ YUV }
Select this if you have connected the DVD
system to your TV using component video
sockets (Y Pb Pr).
{ RGB }
Select this if you have connected the DVD
system to your TV using scart socket. The
factory default setting is RGB.
2
Use 34 keys to select a setting and press
OK to confirm.
001-049 HTS8000S-00-Eng 22/04/2005, 04:07 PM 36