Planet Technology VIP-110 - Manual (Page 63)

Configuration Management Command 51
atpm store
This command stores the ATPM address, destination and hung group tables to the non-volatile
storage.
atpm store [erase]
Syntax description
erase Erase the non-volatile storage before storing the dial plan
database. This option is not recommended except at the very first
time you use the atpm store command.
Allowed only in database update mode
No
Related Command
atpm restore
Destination Table Management Commands
atpm dadd
This command adds a destination entry into the ATPM destination table. A local destination
entry is one of the telephony ports on the ITG.
atpm dadd dest_id h323 {ip_addr/[tcp_port] | host_name/[tcp_port]}
atpm dadd dest_id port port#
Syntax description
dest_id Destination ID. For each destination, you need to assign it a unique
identifier between 0 and 99.
h323 The destination is a remote gateway designated either by an IP
address or a host name.
ip_addr The IP address of the remote destination.
host_name The host name of the remote destination.
tcp_port The H.225 call signaling port which the remote gateway listens for
incoming calls.
port The destination is a local telephony, whose ID is port#.
port# The ID of the telephony port.
Allowed only in database update mode
Yes
Related Commands
atpm ddel
atpm dfind
atpm dlist