Planet Technology VIP-110 User Manual
Page 45

Call Progress Tone Configuration Commands
33
Profile
g723
g729
g723_53
g711
Setting
30
20
30
10
set coding profile_id vad
This command is used to enable/disable the Voice Activity Detector (VAD) for a coding profile.
set coding profile_id vad {on | off}
Syntax description
profile_id
Profile ID or name, as shown in Table 5-1, of the coder to be
modified.
on
Enable VAD.
off
Disable VAD.
Factory default
Profile
g723
g729
g723_53
g711
Setting
on
on
on
on
Fax Coding Profile Configuration Commands
The following sections describe commands that apply to coding profiles for fax.
set coding profile_id fax_hs_pkt_rate
This T.38 mode command is used to set the rate at which high-speed data will be sent across
the network, for a fax coder (i.e., determines the size of the high-speed IFP packets).
set coding profile_id fax_hs_pkt_rate milliseconds
Syntax description
profile_id
Profile ID or name, as shown in Table 5-1, of the coder to be
modified.
milliseconds
Value in milliseconds
Factory default
Profile ID
fax
Setting
30 ms
set coding profile_id fax_hs_redundancy
The T.38 mode command is used to specify the packet-level redundancy for high-speed data
transmissions (i.e., T.4 image data) for a fax coder profile.
set coding profile_id fax_hs_redundancy pkt
Syntax description
profile_id
Profile ID or name, as shown in Table 5-1, of the coder to be
modified.
pkt
Number of prior primary packets to be encapsulated in each fax
payload, ranging from 0 to 2.
Factory default