Pioneer VSX-D811S - Manual (Page 43)

Setting up the receiver 06
43
En
Surround back channel input
setting
(VSX-D811S only)
• Default setting: SB 2ch IN
You only have to make this setting if you are
using a seperate component for decoding
DVDs, and the component has only one
surround back channel output. If this is the
case, select
SB 1ch IN, otherwise leave it set to
SB 2ch IN.
• Use ’ or ‘ to select SB 2ch IN or
SB 1ch IN.
Coaxial digital input settings
Here you tell the receiver what components you
have hooked up to the coaxial
DIGITAL IN jacks
1 and 2 on the back of the receiver.
Coaxial digital 1:
• Default settings: DVD/LD
1 Use ’ or ‘ to assign the coaxial digital
1 input (DVD, TV, CD, CD-R, VCR or OFF).
Coaxial digital 2:
• Default setting: CD
2 Use ’ or ‘ to assign the coaxial digital
2 input (DVD, TV, CD, CD-R, VCR or OFF).
After you assign a component to a digital jack,
whenever you select that component, (for
example, a DVD player) the receiver
automatically changes to the digital input
setting and
DIGITAL shows in the display.
Optical digital input settings
Here you tell the receiver what components you
have hooked up to the optical
DIGITAL IN
jack(s) on the back of the receiver.
Optical digital 1:
• Default settings: TV/SAT
1 Use ’ or ‘ to assign the optical digital
1 input (DVD, TV, CD, CD-R, VCR or OFF).
Optical digital 2
(VSX-D811S only):
• Default setting: CDR/TAPE/MD
2 Use ’ or ‘ to assign the optical digital
2 input (DVD, TV, CD, CD-R, VCR or OFF).
After you assign a component to a digital jack,
whenever you select that component, (for
example, a DVD player) the receiver
automatically changes to the digital input
setting and
DIGITAL shows in the display.
XRB3013A.38.44 01.12.12, 4:46 PM 43