Pioneer VSX-D811S - Manual (Page 13)

Connecting up 03
13
En
Before making or changing any connections, switch off the power and disconnect the power cord from
the AC outlet.
Audio/Video cords
Use audio/video cords (not supplied) to connect
the audio/video components and a video cord
to connect the monitor TV.
Connect red plugs to R (right), white plugs to L
(left), and the yellow plugs to VIDEO.
Be sure to insert completely.
S-video cables
Use S-video cables (not supplied) to get clearer
picture reproduction than regular video cords.
Connect from an S-video jack on the rear of the
receiver to an S-video jack on the video
component you are hooking up.
Be sure to insert completely.
L
R
VIDEO
S VIDEO
Digital audio coaxial cords/
Optical cables
Commercially available digital audio coaxial
cords (standard video cords can also be used)
or optical cables (not supplied) are used to
connect digital components to this receiver.
Be sure to insert completely.
Digital audio coaxial cord
(or standard video cord) Optical cable
Component video cords
Use component video cords to get the best
possible color reproduction of your video
source. The color signal of the TV is divided into
the luminance (Y) signal and the color (PB and
PR) signals and then output. In this way,
interference between the signals is avoided.
Connect from the component video jacks on the
rear of the receiver to the component video
jacks on the video component you are hooking
up.
Y
P
B
P
R
Green
Blue
Red
XRB3013A.13.25 01.12.12, 4:42 PM 13