Pioneer VSX-D811S - Manual (Page 27)

Controls and Displays 04
27
En
11 SIGNAL SELECT (pages 34, 37, 48)
Use to select an input signal.
12 MIDNIGHT/LOUDNESS (page 36)
Use Midnight when listening to movie sound-
tracks at low volume. Use Loudness to boost
the bass and treble at low volume.
13 SPEAKERS
Use to cycle through the speaker
system:
A = B = A+B
14 MONITOR
Press to switch tape monitoring on/off.
15 TONE
Press this button to access the bass and treble
controls, which you can then adjust with the
MULTI JOG/INPUT SELECTOR dial.
16 QUICK SETUP
17 VIDEO INPUT (page 18)
18 DIGITAL IN (VSX-D811S only) (page 18)
19 FL DIMMER
Use this button to make the fluorescent display
(FL) dimmer or brighter.
20 INPUT ATT
Use to attenuate (lower) the level of an analog
input signal to prevent distortion.
21 MPX (page 45)
Press to receive a radio broadcast in mono.
22 BAND (page 45)
Switches between AM and FM radio bands.
23 CLASS (pages 46–47)
Switches between the three banks (classes) of
station presets.
24 TUNER EDIT (pages 46–47)
Press to memorize and name a station for recall
using the
STATION +/– buttons.
1 2 3 4 5 6 7 8 9
10 15 13 12 11 14
Display
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when AUTO signal select is on
SB (VSX-D811S only)
Depending on the source, this lights when
a signal with surround back channel
encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
XRB3013A.26.31 01.12.12, 4:43 PM 27