5 minute guide 02 – Pioneer VSX-D811S User Manual

Page 11

5 minute guide

Plug in the receiver and switch it on, followed by your DVD player, your subwoofer and

the TV.
Make sure you’ve set the video input on your TV to this receiver. Check the manual that came with
the TV if you don’t know how to do this.

Also make sure that

DVD/LD is showing in the receiver’s display, indicating that the DVD input is

selected. If it isn’t, press

DVD/LD on the remote control to set the receiver to the DVD input.

Press QUICK SETUP on the front panel to specify your speaker setup and your room

size.
Use the

MULTI JOG/INPUT SELECTOR dial to select and ENTER to confirm your selection. See

Using the Quick Setup on the next page if you’re unsure about the settings.

Play a DVD, and adjust the volume to your liking.

There are several other sound options you can select. See pages 32–33 for more on this. See also
Choosing your receiver setup on page 38–43 for more setup options.

Depending on your DVD player or source discs, you may only get digital 2 channel stereo and

analog sound. In this case, the listening mode must be set to Standard (it should already be
set—see page 34 if you need to do this) if you want multi-channel surround sound.

XRB3013A.07.12

01.12.12, 4:41 PM

This manual is related to the following products:

VSX-D711