beautypg.com

11 troubleshooting – Philips FWD14 User Manual

Page 28

background image

29

Remote control does not work

Before you press any function button,

‡

ÀUVWVHOHFWWKHFRUUHFWVRXUFHZLWKWKH
remote control instead of the main unit.
Reduce the distance between the remote

‡

control and the unit.
Insert the battery with its polarities

‡

(+/– signs) aligned as indicated.
Replace the battery.

‡

Aim the remote control directly at the

‡

sensor on the front of the unit.

No disc detected

Insert a disc.

‡

Check if the disc is inserted upside down.

‡

Wait until the moisture condensation at

‡

the lens has cleared.
Replace or clean the disc.

‡

8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF

‡

No picture

Check the video connection.

‡

Turn on the TV to the correct Video-In

‡

channel.
Progressive scan is activated but the TV

‡

does not support progressive scan.

Black and white or distorted picture

The disc does not match the TV color

‡

system standard (PAL/NTSC).
Sometimes a slight picture distortion may

‡

appear. This is not a malfunction.
Clean the disc.

‡

A distorted picture may appear during

‡

progressive scan setup.

The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.

7KHDVSHFWUDWLRLIÀ[HGRQWKHORDGHG

‡

DVD disc.
The aspect ratio may not be changed for

‡

some TV systems.

Audio or subtitle languages cannot be set

The disc is not recorded with sound or

‡

subtitles in multiple languages.
The audio or subtitle language setting is

‡

prohibited on the disc.

11 Troubleshooting

Warning

Never remove the casing of this apparatus.

‡

To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site www.
philips.com/welcome. When you contact Philips,
ensure that the apparatus is nearby and the
model number and serial number are available.

No power

Ensure that the AC power plug of the

‡

unit is connected properly.
Ensure that there is power at the AC

‡

outlet.
To save power, the system switches

‡

off automatically 15 minutes after track
play reaches the end and no control is
operated.

No sound or poor sound

Adjust the volume.

‡

Check that the speakers are connected

‡

correctly.
Check if the stripped speaker wires are

‡

clamped.

Left and right sound outputs reversed

Check the speaker connections and

‡

location.

No response from the unit

Disconnect and reconnect the AC power

‡

plug, then turn on the system again.
As a power-saving feature, the unit

‡

switches off automatically 15 minutes
after track play reaches the end and no
control is operated.

English

EN