beautypg.com

10 product information, 6shflàfdwlrqv, Record to a digital recorder – Philips FWD14 User Manual

Page 25

background image

26

10 Product

information

Note

Product information is subject to change

‡

without prior notice.

6SHFLÀFDWLRQV

$PSOLÀHU

Rated Output Power

2 X 10W RMS

Frequency Response

100 - 10000Hz,
±3dB

Signal to Noise Ratio

> 50dB

Output Sensitivity
Line Out (1 kHz 0dB) 2±0.2V

Disc

Laser Type

Semiconductor

Disc Diameter

12cm/8cm

Video Decoding

MPEG-2/MPEG-1

Video DAC

10 Bits

Signal System

PAL/NTSC

Video Format

4:3/16:9

Video S/N

56 dB (minimum)

Composite Video
Output

1.0 Vp-p, 75 ohm

Audio DAC

24Bits / 96 kHz

Total Harmonic
Distortion

<1%

Frequency Response

4 Hz - 20 kHz
(44.1kHz)
4 Hz - 22 kHz
(48 kHz)
4 Hz - 44 kHz
(96 kHz)

6

Press

to start to record.

To pause, press

‡

. To resume, press

again.

To stop, press

‡

.

Record from radio

1

Tune to a radio station.

2

Press

to open the tape door.

3

Insert a blank tape and close the tape
compartment.

4

Press

to start to record.

To pause, press

‡

. To resume, press

again.

To stop, press

‡

.

Record from external source

1

Press USB/MP3 LINK to select an
external source.

2

Connect the external device.

3

Play the selected source.

4

Insert a blank tape and close the tape
compartment.

5

Press

to start to record.

To pause, press

‡

. To resume, press

again.

To stop, press

‡

.

Record to a digital recorder

You can record audios through the product to a
digital recorder.

1

Connect a coaxial cable (not supplied) to:

the

‡

COAXIAL socket on this unit.

the digital input socket on the digital

‡

recorder.

2

Play the audio to be recorded.

3

Start to record on the digital recorder
(see the user manual of the digital
recorder).

EN