Powerware 9135 Two-in-One UPS 5000/6000 VA - Manual (Page 66)

ADDITIONAL UPS FEATURES
EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide S 164201726 Rev 1
www.powerware.com
60
Network Management Card (Optional)
It is not necessary to shut down the UPS before installing a
communication card.
1. Remove the slot cover secured by two screws.
2. Insert the communication card into the slot.
3. Secure the card with both screws.
BATT. NO.RPO CONTACTS RS−232
DO NOT DISCONNECT UNDER LOAD BATTERY CABLE CAUTION:
CONNECTOR
180Vdc
GROUP 1 SWITCHED
BATTERY
Communication Card
(restricted access)
Figure 37. Network Management Card (EU Model Shown)